|
|
Post by alexslash on Oct 14, 2009 20:48:22 GMT -5
hi i am new to the slash by a month but i am having signal problems. i would go 10feet away and it would make noise and turn by itself. i rest the speed control and also changed the Cristal's, but it still does not work please help ???
|
|
|
|
Post by reddogboy81 on Oct 14, 2009 22:35:17 GMT -5
I know you have probably already done this but have you tried changing the batteries in the controller and recharging your battery? I have also heard that a faulty servo can cause signal issues. Try unplugging your servo and doing a range test. Also check your antenna wire to see if it has been damaged. Because of the water proof box, sometimes when you put the box back together you can pinch the wire which breaks it. Also if the antenna crosses itself you can lose signal so make sure that it is run as straight and as clear of the truck as possible. Make sure that the antenna wire is not crossing either the esc or the servo wire, I've heard of people having interference there too. I hope this helps.
|
|
