icsam
New Member
Posts: 5 
|
Post by icsam on Jun 19, 2009 22:23:53 GMT -5
Hey guys, just curious as to what shock positions and spaers you guys are running. I just bought a Slash and noticed that the rear end sits low and does not rebound the way i like it to. I want to make adjustments but don't want to hurt performance and I don't want it to become unstable because i have set it too hard.
Any suggestions would help alot, I want to get a few runs in tomorrow.
Thanks.
|
|
|
|
Post by slash127 on Jun 20, 2009 0:31:50 GMT -5
you dont want the back end to rebound, and you want room for the suspension to be able to come up
|
|
|
|
Post by mrgrimm on Aug 29, 2009 21:55:43 GMT -5
Depends on the weight of your battery and how you want it to handle. I run all the way in on the a-arms just to get that "droop" look when its in the air. I run no or medium spacer up front with 30wt, and large or large+medium spacer on back with 50wt. Only little mod I would suggest to rear shocks are taking the bottom spring rest and mount off and sliding a 1/8" or so peice of rubber fuel tube or something simliar on the shaft so it doesn't bottom out bad if you jump big!
|
|
|
|
Post by associatedfreak on Sept 13, 2009 16:19:59 GMT -5
a good thing to do with the shocks is to put from 40-70 in the rear and 25-35 in the front and add spacers for the shocks to return also if u want to have better handeling like on a track use the inside 3 holes on the arm shock screw in spots
|
|
