Post by crack123 on Mar 21, 2009 15:10:18 GMT -5
Hello @ All !
I am from Austria ( Europe ) and i would show you my HPI Savage SS Brushless-Centerdiff Project!
a big sorry for my bad englisch at this point, i hope you can read and understand it
my old Savage SS stands around and need to be pushed up to new dimensions and this is the way of it :
Partlist:
Mamba Monster Max ESC
Feigao 10XL 1600Kv Motor a Neu/Castle 1800KV Motor will be incomming next time..
Castle Creation 10A BEC
Thundertiger(ACE) DS1015 Steering Servo
Spektrum DX3S remote control
2 A123 ( LiFePo ) 6S Packs parallel
selfmade Akkutrays on each side
Titanium Hinge Pins
Titanium Srews on the Bulks and Diffhousings
Jammin CRT X1 Center Diff with 62 Touth Spur Gear
CNC Machined Motor/Diff mount from a friend
Carbon ESC/BEC holder 3mm on the stock Motorplateholder from the Nitroversion
Carbon RC/Servo mount ( first try doesnt look very good....i know)
for some testrides a tvp made from acrylic glass 5mm thick
2do List:
Carbon TVPs 3mm
Carbon Skid Plate 3mm
New Carbon RC/Servo mount 3mm
Proline Crowd Pleazer 2.0 Body
Proline Velocity 1/2 offset Rims
Proline Bad land Tires
hier is my picture album i hope you can watch it in USA or somewhere
www.comuse.net/gallery2/v/Crack123/Savage-Brushless/
Klick on the *nächste* Button to go to the next side or my name * oswald scharinger* to see my other Rc cars and stuff and klick on the pictures for a bigger view!
The car have at this time on the 62touth spurgear a 9 tough pinion mountet, the truck has a topspeed of ~35Km/h at this time, there is a big zone to go higher speed with a 12 touth pinion or some bigger one !
at this time 1 tire has a big hole from a rock or something, the badlands and Proline rims are ordered and i am waiting for it, the Crowd Pleazer body is also ordered, the body on the Savage is an old body and is 5cm to short ( see the pics ) but better than nothing
Hope you enjoy it a little bit
Savage Forever!
I am from Austria ( Europe ) and i would show you my HPI Savage SS Brushless-Centerdiff Project!
a big sorry for my bad englisch at this point, i hope you can read and understand it
my old Savage SS stands around and need to be pushed up to new dimensions and this is the way of it :
Partlist:
Mamba Monster Max ESC
Feigao 10XL 1600Kv Motor a Neu/Castle 1800KV Motor will be incomming next time..
Castle Creation 10A BEC
Thundertiger(ACE) DS1015 Steering Servo
Spektrum DX3S remote control
2 A123 ( LiFePo ) 6S Packs parallel
selfmade Akkutrays on each side
Titanium Hinge Pins
Titanium Srews on the Bulks and Diffhousings
Jammin CRT X1 Center Diff with 62 Touth Spur Gear
CNC Machined Motor/Diff mount from a friend
Carbon ESC/BEC holder 3mm on the stock Motorplateholder from the Nitroversion
Carbon RC/Servo mount ( first try doesnt look very good....i know
)for some testrides a tvp made from acrylic glass 5mm thick
2do List:
Carbon TVPs 3mm
Carbon Skid Plate 3mm
New Carbon RC/Servo mount 3mm
Proline Crowd Pleazer 2.0 Body
Proline Velocity 1/2 offset Rims
Proline Bad land Tires
hier is my picture album i hope you can watch it in USA or somewhere
www.comuse.net/gallery2/v/Crack123/Savage-Brushless/
Klick on the *nächste* Button to go to the next side or my name * oswald scharinger* to see my other Rc cars and stuff and klick on the pictures for a bigger view!
The car have at this time on the 62touth spurgear a 9 tough pinion mountet, the truck has a topspeed of ~35Km/h at this time, there is a big zone to go higher speed with a 12 touth pinion or some bigger one !
at this time 1 tire has a big hole from a rock or something, the badlands and Proline rims are ordered and i am waiting for it, the Crowd Pleazer body is also ordered, the body on the Savage is an old body and is 5cm to short ( see the pics ) but better than nothing
Hope you enjoy it a little bit
Savage Forever!