manic
New Member
Posts: 3
|
Post by manic on Mar 20, 2009 2:08:57 GMT -5
It sounds like something has stripped in the diff. The motor and spur gears are fine but I have no drive. Where do I start looking?
|
|
|
|
Post by reddogboy81 on Mar 20, 2009 9:29:30 GMT -5
I know it sounds strange but check your wheels and hex bolts you may have rounded one of them. Ive done that a few times.
|
|
|
|
Post by ranger150 on Mar 20, 2009 18:25:36 GMT -5
Check the pinion too. mine was loose out of the factory. Slipper clutch backed off too far?
|
|
|
|
Post by mac6986 on Mar 20, 2009 22:15:17 GMT -5
the best thing to do IMHO, start from the wheels and work your way back to the motor. checking the hubs, both ends of the wheel drive shafts, making sure the set screws didnt back out, making sure your silpper clutch isnt backed out, and that your pinion gear is tight and the set screw is in place. that way you will most certainly come across something fouled-up
|
|
manic
New Member
Posts: 3
|
Post by manic on Mar 22, 2009 4:41:39 GMT -5
Thank guys.
Ended up being a stripped wheel hex. Fixed and back on the track bashing it up.
|
|
|
|
Post by yoyoitsmario on Mar 24, 2009 15:06:23 GMT -5
YA IT WOULDNT BE THE INSIDE GEARS BECAUSE THEY ARE METAL. UNLESS YOU HAVE A HIGH POWERED MOTOR.
|
|
|
|
Post by radbow on Mar 24, 2009 23:26:54 GMT -5
CHECK YOUR SLIPPER CLUTCH !!! IT MAKES A LOUD NOISE WEN SLIPPING SO IF U THINK UR GETTING TO MUCH SLIP THEN TIGHTEN IT
|
|
|
|
Post by Rob #28 on Mar 25, 2009 7:56:39 GMT -5
Guys you need to read. He found the problem and fixed it already.
|
|
