|
|
Post by daddydancool on Nov 9, 2008 21:53:22 GMT -5
i want to change the tires on my slayer and i was thinking about the new sc8 tires...
if i change the hub for a 17mm hex, will it fit?
|
|
|
|
Post by Rob #28 on Nov 10, 2008 7:08:26 GMT -5
That should work. I haven't done it personally, but the offset seems to be the same as 1/8th buggy which people have done that without any problems.
|
|
|
|
Post by daddydancool on Nov 10, 2008 8:47:08 GMT -5
ok thanks Rob, I am going to my lhs this afternoon, i will order a set  I should race next summer against SC8 and truggy since we should not be enough with CORR truck, My slayer will be smaller but i think that with a set of swaybar and P3 rockers it should be able to fit in this group! |
|
|
|
Post by daddydancool on Nov 12, 2008 12:14:49 GMT -5
|
|
|
|
Post by Steve on Nov 12, 2008 23:36:23 GMT -5
I bet those will look pretty trick on your Slash. Post some pics when you get em on.
|
|
|
|
Post by cousineddy on Nov 28, 2008 22:19:46 GMT -5
I mounted a set of Proline Switches to my Traxxas Slayer rims by cutting the inside bead of the tire to match the rim,They work very well and look good,much better than the sc8 tires in my opinion.I ran my E-Slayer at SRS in Scottsdale today and it was very hooked up.
|
|
