New Slash mesh

[sixtruck]

Its new hasn't been out with it yet, waiting to get a charger.
When you roll it back and forth a little , you can hear the gears clicking , is that to loose , right or ? I set it with a piece of paper , but wanted to ask the pros out there , newbie here , don't want to be replacing it right off the start.

A couple things i have done is , put on a front sway bar i made myself, drilled out the arm holes for the suspension to float more , added bump stops on shocks so not to bottom out. Went through and checked all bolts . Applied lock tight on them.
As soon as i can upload pictures i will

AND MOST IMPORTANT
APPLIED SCALERCRACER.COM DECALS TO FRONT AND BACK

[James#17]

Feb 2, 2009 9:29:46 GMT -5 sixtruck said:

Its new hasn't been out with it yet, waiting to get a charger.
When you roll it back and forth a little , you can hear the gears clicking , is that to loose , right or ? I set it with a piece of paper , but wanted to ask the pros out there , newbie here , don't want to be replacing it right off the start.

A couple things i have done is , put on a front sway bar i made myself, drilled out the arm holes for the suspension to float more , added bump stops on shocks so not to bottom out. Went through and checked all bolts . Applied lock tight on them.
As soon as i can upload pictures i will

AND MOST IMPORTANT
APPLIED SCALERCRACER.COM DECALS TO FRONT AND BACK

I would love to see how you made the sway bars. Out of all the changes you have made I think the drilling of the A-arms will give you the most positive change.

Then second is adding the scaleRCracer.com decals.

Make sure to post pictures here and at other forums with the decals showing.

[sixtruck]

As soon as i can, ill post . i put the bright red on the hood , i have the amsoil body so it really shows up on the silver.

Question , when attaching the ends on swaybar does the height make a difference ? the ends that attach to the turnbuckle on the shock screws