|
|
Post by devinci on Jan 26, 2009 1:49:39 GMT -5
my slash has been glitching really bad and i can't seem to find the source. when i try to turn the truck starts to go as well even though i'm not touching the throttle. the turning is normal but the motor just glitches out of control.
any ideas or suggestions would be greatly appreciated. i just want to get this awesome truck working again.
thanks
|
|
next559
Stock Class Racer
Posts: 66
|
Post by next559 on Jan 26, 2009 23:48:43 GMT -5
check all the wires and connections. might have a frayed wire or loose connection
if everything looks ok try resetting the esc
|
|
|
|
Post by igotbannedfromtrx on Jan 27, 2009 4:33:22 GMT -5
i had that problum with mine turns out water got in the radio box and was messing with the rx so try looking there if u ran it in water
|
|
|
|
Post by devinci on Jan 29, 2009 18:18:28 GMT -5
ya i've checked in the radio box but it was dry. any other suggestions?
|
|
|
|
Post by drtdawg on Jan 30, 2009 22:51:35 GMT -5
if you are using the stock radio could be a bad set of crystals or they are loose or you broke a capacitor off the motor
|
|
88gators325
Expert Class Racer
Xtreme RC Bearings Racing
Posts: 164
|
Post by 88gators325 on Jan 31, 2009 16:58:42 GMT -5
try reprogramming it. should help. whenever my truck is glitchy even alittle i reprogram it so it doesnt get out of control. i ll post a vid of how to from traxxas.
|
|
88gators325
Expert Class Racer
Xtreme RC Bearings Racing
Posts: 164
|
Post by 88gators325 on Jan 31, 2009 17:01:28 GMT -5
|
|
|
|
Post by gannbig on Feb 1, 2009 0:05:03 GMT -5
well i have had that problem to when i put the mamba side winder in it and it was the servo i put a deferent servo in it and it work just fine hope that helps out
|
|
