|
|
Post by raney120 on Jul 19, 2008 0:56:56 GMT -5
I burned up the stock Titan motor so i put a 19 turn motor in it. Now after I run it for more than a few minutes it will just shut off. I let it sit for a few minutes and then it will run again but shut off again. I don't know what to do and i'm running a spec class that you have to use the stock esc in. Any ideas?
|
|
peej
"Is that what you wanna be doin' when Jesus comes back?"
Posts: 34
|
Post by peej on Jul 19, 2008 6:31:24 GMT -5
Is the ESC warm to the touch? Any LED lit up after it shuts down? Are you using the stock size pinion?
|
|
|
|
Post by raney120 on Jul 19, 2008 11:09:56 GMT -5
Yeah the esc gets hot. The LED turns off and if I turn it back on right away it glitches and then shuts off again. I'm running the stock pinion. The only things I've done are spektrum radio and I put deans on the motor and battery wires.
|
|
|
|
Post by Rob #28 on Jul 19, 2008 11:21:27 GMT -5
Wonder if when you smoked the motor it took the esc with it...
|
|
|
|
Post by salteen on Jul 19, 2008 12:13:51 GMT -5
either try a different rx/tx or throw an rx pack on the spektrum and see what happens. sounds like the BEC isn't getting enough juice to the rx |
|
|
|
Post by raney120 on Jul 19, 2008 17:45:06 GMT -5
I'll try putting the stock rx/tx back on and see what happens. Another guy at my track said that it could be the spektrum too but I didn't see why since it never had the problem before i put the 19 turn on it.
|
|
