|
|
Post by njbmxer on Jul 10, 2008 12:28:28 GMT -5
so i went out side today turned on my slash and it just starts twitching like crazy! the wheels were turning and the back wheels were moving..anyone else have this problum?
|
|
|
|
Post by chip cross on Jul 10, 2008 14:45:19 GMT -5
Are you still using the stock Am RX/TX ??
|
|
|
|
Post by Steve on Jul 10, 2008 15:16:18 GMT -5
Could be radio interference, a loose crystal, a torn antenna etc... Check all your connections and everything.
|
|
|
|
Post by cartronicshn on Jul 10, 2008 17:31:41 GMT -5
I have the same problem, i am pretty sure it's interference from all the cables and electronics in and around my office, it wreacks havoc on all my am radios, not on the fm of spektrums though.
|
|
|
|
Post by chiefmasterbeast on Jul 11, 2008 1:47:28 GMT -5
It may sound stupid, but make sure you turn on the transmiter before the truck. I've always done that and never had any interference problems in my other trucks.
|
|
|
|
Post by njbmxer on Jul 11, 2008 9:14:31 GMT -5
1)i still have the stock radio
2)my antenna isnt ripper and ill check my cristals when i go out side
3)im preety sure its not the wires cus i use the same radio in my emaxx wit no problems and a tq2 in my stampede with no problems
|
|
|
|
Post by Steve on Jul 11, 2008 10:01:43 GMT -5
Also check your throttle / steering trim.
|
|
|
|
Post by njbmxer on Jul 11, 2008 10:34:42 GMT -5
ok i got it...turns out the "sealed" resiver box isnt really all that sealed. i opened it up and i find a lot of water in it! but now i have another probel...i got it running but now the motor is smoking like crazy!wats wrong with that? but it still runs
|
|
|
|
Post by njbmxer on Jul 11, 2008 20:36:00 GMT -5
never mind...picked up some motor spray and now it works like a charm
|
|
